Vehicle Detection and Classification using LTE-CommSense
share
We demonstrated a vehicle detection and classification method based on Long Term Evolution (LTE) communication infrastructure based environment sensing instrument, termed as LTE-CommSense by the authors. This technology is a novel passive sensing system which focuses on the reference signals embedded in the sub-frames of LTE resource grid. It compares the received signal with the expected reference signal, extracts the evaluated channel state information (CSI) and analyzes it to estimate the change in the environment. For vehicle detection and subsequent classification, our setup is similar to a passive radar in forward scattering radar (FSR) mode. Instead of performing the radio frequency (RF) signals directly, we take advantage of the processing that happens in a LTE receiver user equipment (UE). We tap into the channel estimation and equalization block and extract the CSI value. CSI value reflects the property of the communication channel between communication base station (eNodeB) and UE. We use CSI values for with and vehicle and without vehicle case in outdoor open road environment. Being a receiver only system, there is no need for any transmission and related regulations. Therefore, this system is low cost, power efficient and difficult to detect. Also, most of its processing will be done by the existing LTE communication receiver (UE). In this paper, we establish our claim by analyzing field-collected data. Live LTE downlink (DL) signal is captured using modeled LTE UE using software defined radio (SDR). The detection analysis and classification performance shows promising results and ascertains that, LTE-CommSense is capable of detection and classification of different types of vehicles in outdoor road environment.
READ FULL TEXT
