Modeling and Simulation of a Point to Point Spherical Articulated Manipulator using Optimal Control

10/26/2020
by   Prathamesh Saraf, et al.
0

This paper aims to design an optimal stability controller for a point to point trajectory tracking 3 degree of freedom articulated manipulator. The DH convention is used to obtain the forward and inverse kinematics of the manipulator. The manipulator dynamics are formulated using the Lagrange Euler method to obtain a nonlinear system. The complicated nonlinear equations obtained are then linearized in order to implement the optimal LQR. The simulations are performed in MATLAB and Simulink and the optimal controllers performance is tested for various conditions and the results are presented. The results obtained prove the superiority of LQR over conventional PID control.

READ FULL TEXT

page 1

page 2

page 3

page 4

research
08/04/2023

Nonlinear Controller Design for a Quadrotor with Inverted Pendulum

The quadrotor is a 6 degrees-of-freedom (DoF) system with underactuation...
research
06/01/2020

Nonlinear Model Predictive Control of Robotic Systems with Control Lyapunov Functions

The theoretical unification of Nonlinear Model Predictive Control (NMPC)...
research
04/11/2017

Control Synthesis of Nonlinear Sampled Switched Systems using Euler's Method

In this paper, we propose a symbolic control synthesis method for nonlin...
research
07/20/2023

Differentially Flat Learning-based Model Predictive Control Using a Stability, State, and Input Constraining Safety Filter

Learning-based optimal control algorithms control unknown systems using ...
research
02/13/2019

Using Approximate Models in Robot Learning

Trajectory following is one of the complicated control problems when its...
research
01/20/2019

CASCLIK: CasADi-Based Closed-Loop Inverse Kinematics

A Python module for rapid prototyping of constraint-based closed-loop in...

Please sign up or login with your details

Forgot password? Click here to reset