Measured Channel Hardening in an Indoor Multiband Scenario

12/13/2018
by   Golsa Ghiaasi, et al.
0

A study of channel hardening in a large-scale antenna system has been carried out by means of indoor channel measurements over four frequency bands, namely 1.472 GHz, 2.6 GHz, 3.82 GHz and 4.16 GHz. NTNU's Reconfigurable Radio Network Platform has been used to record the channel estimates for 40 single user non-line of sight radio links to a 64 element wide-band antenna array. By examining the rms delay spread and the ratio of the normalized subcarrier to average SISO link power of the radio channel received by a single user after combination, the hardening of this equivalent channel is analyzed for various numbers of nodes. The channel hardening merits show consistent behaviour throughout the frequency bands. By combining 16 antennas the rms delay spread of the equivalent channel is reduced from above 100 ns to below 35 ns with significantly reduced variation in the channel power.

READ FULL TEXT

page 3

page 4

research
12/26/2017

On the Frequency Dependency of Radio Channel's Delay Spread: Analyses and Findings From mmMAGIC Multi-frequency Channel Sounding

This paper analyzes the frequency dependency of the radio propagation ch...
research
01/12/2022

Implementation of FGPA based Channel Sounder for Large scale antenna systems using RFNoC on USRP Platform

This paper concentrates on building a multi-antenna FPGA based Channel S...
research
11/21/2022

Terahertz Channel Measurement and Analysis on a University Campus Street

Owning abundant bandwidth resource, the Terahertz (0.1-10 THz) band is a...
research
05/19/2022

Demo: A Transparent Antenna System for In-Building Networks

For in-building networks, the potential of transparent antennas, which a...
research
08/08/2022

Joint Channel Measurement and Simulation Analysis in an L-shaped Indoor Hallway in the Terahertz Band

The Terahertz (THz) band (0.1-10 THz), which supports Terabit-per-second...
research
05/22/2021

27.5-29.5 GHz Switched Array Sounder for Dynamic Channel Characterization: Design, Implementation and Measurements

A pre-requisite for the design of wireless systems is the understanding ...
research
04/03/2018

Modeling the Multipath Cross-Polarization Ratio for Above-6 GHz Radio Links

In this paper, we parameterize an excess loss-based multipath component ...

Please sign up or login with your details

Forgot password? Click here to reset