Inter-Cell Antenna Calibration for Coherent Joint Transmission in TDD System

05/03/2019
by   Hanqing Xu, et al.
0

In this work the modeling and calibration method of reciprocity error in a coherent TDD coordinated multi-point (CoMP) joint transmission (JT) system are addressed. The modeling includes parameters such as amplitude gains and phase differences of RF chains between the eNBs. The calibration method used for inter-cell antenna calibration is based on precoding matrix indicator (PMI) feedback by UE. Furthermore, we provide some simulation results for evaluating the performance of the calibration method in different cases such as varying estimation-period, cell-specific reference signals (CRS) ports configuration, signal to noise ratio (SNR), phase difference, etc. The main conclusion is that the proposed method for intercell antenna calibration has good performance for estimating the residual phase difference. Keywords-LTE-Advanced; TDD; CoMP; JT; reciprocity error; phase difference; inter-cell antenna calibration

READ FULL TEXT

page 1

page 2

page 3

page 4

research
04/11/2023

Phase Calibration of Distributed Antenna Arrays

Antenna arrays can be either reciprocity calibrated (R-calibrated), whic...
research
06/19/2016

Digital Calibration Method for High Resolution in Analog/RF Designs

Transistor random mismatch continuously poses challenges for analog/RF c...
research
07/12/2022

Statistics of the interaural parameters for dichotic tones in diotic noise (N_0 S_ψ)

Stimuli consisting of an interaurally phase-shifted tone in diotic noise...
research
07/27/2020

A calibration-free method for biosensing in cell manufacturing

Chimeric antigen receptor T cell therapy has demonstrated innovative the...
research
07/16/2021

Explicit Calibration of mmWave Phased Arrays with Phase Dependent Errors

We consider an error model for phased array with gain errors and phase e...
research
06/22/2023

A diagnosis of the primary difference between EuroForMix and STRmix

There is interest in comparing the output, principally the likelihood ra...
research
06/11/2020

Geometric and Stiffness Modeling and Design of Calibration Experiments for the 7 dof Serial Manipulator KUKA iiwa 14 R820

The present project deals with the elastostatic modeling and calibration...

Please sign up or login with your details

Forgot password? Click here to reset