Integrating Combined Task and Motion Planning with Compliant Control

03/26/2020
by   Hao Chen, et al.
0

Planning a motion for inserting pegs remains an open problem. The difficulty lies in both the inevitable errors in the grasps of a robotic hand and absolute precision problems in robot joint motors. This paper proposes an integral method to solve the problem. The method uses combined task and motion planning to plan the grasps and motion for a dual-arm robot to pick up the objects and move them to assembly poses. Then, it controls the dual-arm robot using a compliant strategy (a combination of linear search, spiral search, and impedance control) to finish up the insertion. The method is implemented on a dual-arm Universal Robots 3 robot. Six objects, including a connector with fifteen peg-in-hole pairs for detailed analysis and other five objects with different contours of pegs and holes for additional validation, were tested by the robot. Experimental results show reasonable force-torque signal changes and end-effector position changes. The proposed method exhibits high robustness and high fidelity in successfully conducting planned peg-in-hole tasks.

READ FULL TEXT

page 2

page 11

page 12

page 13

page 17

research
03/02/2019

Dual-arm Assembly Planning Considering Gravitational Constraints

Planning dual-arm assembly of more than three objects is a challenging T...
research
11/03/2020

A Laser-based Dual-arm System for Precise Control of Collaborative Robots

Collaborative robots offer increased interaction capabilities at relativ...
research
11/20/2022

Multi-Arm Bin-Picking in Real-Time: A Combined Task and Motion Planning Approach

Automated bin-picking is a prerequisite for fully automated manufacturin...
research
09/03/2022

Reinforcement Learning with Prior Policy Guidance for Motion Planning of Dual-Arm Free-Floating Space Robot

Reinforcement learning methods as a promising technique have achieved su...
research
11/30/2020

Learning from Incremental Directional Corrections

This paper proposes a technique which enables a robot to learn a control...
research
09/30/2020

Multi-Pen Robust Robotic 3D Drawing Using Closed-Loop Planning

This paper develops a flexible and robust robotic system for autonomous ...
research
11/20/1998

A Human - machine interface for teleoperation of arm manipulators in a complex environment

This paper discusses the feasibility of using configuration space (C-spa...

Please sign up or login with your details

Forgot password? Click here to reset