Design of an FPGA-based USB 3.0 device controller

01/27/2023
by   Zhe Ning, et al.
0

The traditional USB 3.0 communication based on FPGA uses an external chip as a USB PHY or a USB controller including a USB PHY. This paper realizes a USB 3.0 controller by using FPGA resources, in which FPGA logic realizes a serial interface engine, and an FPGA internal transceiver is as a USB PHY. Used slices percent after implementation is 4.59 that the speed of USB 3.0 is more than 320 MB/s bulk-in and bulk-out transfers.

READ FULL TEXT

page 8

page 9

research
11/20/2018

Design paradigms of intelligent control systems on a chip

This paper focuses on the Field Programmable Gate Array (FPGA) design an...
research
01/05/2023

FPGA Implementation of SIMON-128 Cryptographic Algorithm Using Artix-7

FPGA is a hardware architecture based on a matrix of programmable and co...
research
08/21/2021

Programmable FPGA-based Memory Controller

Even with generational improvements in DRAM technology, memory access la...
research
12/07/2022

FPGA Implementation of Multi-Layer Machine Learning Equalizer with On-Chip Training

We design and implement an adaptive machine learning equalizer that alte...
research
09/17/2018

Design and Implementation of High-throughput PCIe with DMA Architecture between FPGA and PowerPC

We designed and implemented a direct memory access (DMA) architecture of...
research
04/15/2023

Implementation of Digital Circuits on Three-Dimensional FPGAs Using Simulated Annealing

3D FPGAs have recently been produced as the next generation of the FPGA ...
research
04/04/2023

Virtio-FPGA: a virtualization solution for SoC-attached FPGAs

Recently, FPGA accelerators have risen in popularity as they present a s...

Please sign up or login with your details

Forgot password? Click here to reset