3D Printed Graded Porous Sensors for Soft Sensorized Insoles with Gait Phase Ground Reaction Forces Estimation

03/08/2023
by   Nick Willemstein, et al.
0

Sensorized insoles provide a tool to perform gait studies and health monitoring during daily life. These sensorized insoles need to be comfortable and lightweight to be accepted. Previous work has already demonstrated that sensorized insoles are possible and can estimate both ground reaction force and gait cycle. However, these are often assemblies of commercial components restricting design freedom and flexibility. Within this work, we investigate the feasibility of using four 3D-printed porous (foam-like) piezoresistive sensors embedded in a commercial insole. These sensors were evaluated using an instrumented treadmill as the golden standard. It was observed that the four sensors behaved in line with the expected change in pressure distribution during the gait cycle. In addition, Hammerstein-Wiener models were identified that were capable of estimating the vertical and mediolateral ground reaction forces (GRFs). Their NRMSE fits were on average 82 Similarly, for the averaged gait cycle the R^2 values were 0.98 and 0.99 with normalized RMS errors overall below 6 insoles based on commercial force sensing resistors but at a significantly lower cost (over four times cheaper). Thereby indicating that our 3D-printed sensors can be an interesting option for sensorized insoles. The advantage of 3D printing these sensors is that it allows for significantly more design freedom, reduces assembly, and is cheaper. However, further research is needed to exploit this design freedom for complex sensors, estimate the anteroposterior GRF, and fully 3D print the entire insole.

READ FULL TEXT

page 3

page 4

research
03/25/2023

An Open-Source Modular Treadmill for Dynamic Force Measurement with Load Dependant Range Adjustment

Ground reaction force sensing is one of the key components of gait analy...
research
11/09/2020

Upper Extremity Load Reduction for Lower LimbExoskeleton Trajectory Generation Using AnkleTorque Minimization

Recently, the lower limb exoskeletons which providemobility for parapleg...
research
02/01/2021

Spatiotemporal Ground Reaction Force Analysis using Convolutional Neural Networks to Analyze Parkinsonian Gait

Parkinson's disease (PD) is a non-curable disease that commonly found am...
research
01/16/2023

Haptic Transparency and Interaction Force Control for a Lower-Limb Exoskeleton

It is an open problem to control the interaction forces of lower-limb ex...
research
10/26/2010

Translation-Invariant Representation for Cumulative Foot Pressure Images

Human can be distinguished by different limb movements and unique ground...
research
08/13/2018

What is Unique in Individual Gait Patterns? Understanding and Interpreting Deep Learning in Gait Analysis

Machine learning (ML) techniques such as (deep) artificial neural networ...
research
12/07/2022

GaitVibe+: Enhancing Structural Vibration-based Footstep Localization Using Temporary Cameras for In-home Gait Analysis

In-home gait analysis is important for providing early diagnosis and ada...

Please sign up or login with your details

Forgot password? Click here to reset